Rival Deep Fryer Manual
• Unplug from outlet and allow unit to cool. Always turn control to OFF then disconnect plug from wall outlet BEFORE disconnecting BREAK-AWAY CORD. • Clean the outside of the fryer and lid with a damp cloth. Opcom Activate Password Executive. CAUTION: Do not use abrasive pads or alcohol to clean the fryer. • Remove basket handle, if one is included. Frying basket can be washed in hot soapy water. • Rinse and towel dry carefully.
Congratulations on the purchase of your New Rival Deep Fryer. This Deep Fryer is equipped with Rival’s exclusive SureRELEASE.
• Pour out oil and discard properly. • Wipe the inside with paper towels to absorb excess grease.
Wash interior of fryer with hot soapy water. Rinse and dry thoroughly. CAUTION: Never immerse the fryer in water or wash in running water. If you own a fryer with a removable bowl or other removable parts, refer to the instruction manual for your specific fryer to determine which parts can be cleaned in the dishwasher.
Ohmicide Mac Keygen Generator. How do I remove or replace the oil bowl if I own a fryer with a removable bowl? Covered oil can be stored in a cool dark place for up to 3 months.
Never store oil in the refrigerator. Replace the oil if you notice: • excessive smoking at normal temperatures • strong oil discoloration • a rancid smell • excessive foaming around the frying food When frying with strong flavored foods (like fish), the oil should be cooled and discarded after use.
If frying with mild flavored foods, the oil can be cooled, strained through a cheesecloth (to remove crumbs) and used again. There is an odor coming from my fryer and it has been cleaned xE2 x80安hat may be causing this? • The fryer may give off an odor when the filter has not been changed regularly. A charcoal and cotton filter should be replaced every 3 months or 15 uses. Replacement filters can be purchased on our website.
• Some fryers may have a removable metal mesh filter that may be able to be cleaned in the dishwasher or sink instead of a charcoal and cotton filter. If that is the case, refer to the instruction manual for your specific fryer for filter cleaning instructions.
What type of oil should I use in my fryer?
• 1 Answer SOURCE: I had this same problem which is how I came across your post, and I found on the Rival website ( www.rivalproducts.com ) you can email the company and tell them the model number and they will email you the manual, and if you're like me and hate to wait that long, you can call their customer service number and tell them what you need and they will email you the manual in about an hour. The number the website gave me was 1-800-323-9519, and I also realized there was also a number on the box too. Posted on Apr 16, 2008. • 2692 Answers SOURCE: Ther below taken straight from the RIVAL web site. Remove the oil bowl by lifting the bowl straight up out of the plastic exterior.
To replace oil bowl, be sure the brass guide post (between the 2 electric prongs on the bottom of the bowl) is aligned properly with the center hole of the receptacle in the bottom of the housing. The brass guide post should guide the electric prongs into the correct position. Firmly press on bowl to ensure it is positioned properly. Lid should close tightly. Posted on Dec 26, 2008. Ther below taken straight from the RIVAL web site. Remove the oil bowl by lifting the bowl straight up out of the plastic exterior.
To replace oil bowl, be sure the brass guide post (between the 2 electric prongs on the bottom of the bowl) is aligned properly with the center hole of the receptacle in the bottom of the housing. The brass guide post should guide the electric prongs into the correct position. Firmly press on bowl to ensure it is positioned properly. Lid should close tightly. Dec 26, 2008 .